WipLL Price List includes a few UPS based solutions for battery back up for WipLL CPE, WipLL PPR or a single BSR Base Station.

Chart showing ASWipLL Frequency Bands

• ASWipLL’s Base Station interface is Fast Ethernet or Ethernet
• An MPLS switch connects ASWipLL Base Station to the MPLS backbone....

Info on ASWipLL PPPoE Bridging...

Comparison Chart....

Comparison Chart....

• Open Architecture
• QoS and Bandwidth Management
• Ideal Air MAC protocol
• Routing and Bridging
• Battery Back Up
• ASWipLL and VoIP – Typical Network....

ASWipLL’s solution works in a variety of bands....

• Technology: Broadband Wireless Access (BWA)
• Services:
– High speed data
– VoIP, TDMoIP and multi media....

Application:
• ASWipLL (AS3010) can be used for the transfer of:
• E1/T1
• Fractional E1/T1
• V.35

A new member is joining ASWipLL family: ASWipLL 700 MHz TDD working @ 698-746 MHz.
WipLL 700 MHz - Specifications.....

ASWipLL provides an ideal solution for Internet access for education systems such as schools.
ASWipLL’s advantages for this application are....

A new member is joining ASWipLL family....

• A solution for wireless transfer of E1/T1 or for Fractional E1/T1 can use ASWipLL and converters
• This solution includes a few products however it is low cost and it can work in different bands:
• Let us look at two solutions....

• Tip 101 describes ASWipLL CPE Auto Connect
• This tip (103) includes FAQS (and answers…) about WipLL CPE Auto Connect
• How do I order Auto Connect feature?
When ordering SPR/IDR which need to work with Auto Connect – order also the Auto Connect
license for it. The item in WipLL’s Price List is:
Auto Connect License per SPR / IDR 8001Axxx....

• WipLL has high availability:
– High Mean Time Between Failure (MTBF)
– Low Mean Time To Repair (MTTR)
• WipLL supports mechanisms to cope with power failure:
– Power Supply Redundancy in Base Station Power System (BSPS)
– Battery Back Up in Base Station Power System (BSPS)
– UPS-based solutions for CPE and for small-scale Base Station – in WipLL price list....

• Auto Connect - CPE (SPR / IDR) needs Zero Configuration when installed:
– No need for pre configuration
– No need for configuration on site
– No need for a technician on site
– The configuration process is automatic

• A single SPR can provide service to multiple apartments in a building:
• reducing dramatically the cost per line
• reducing dramatically the cost of installation....

A WipLL link is installed in the UK with the following characteristics:
• Location: Nottingham - Londonthorpe
• Range: 36 KM....

• WipLL is one of only two BWA products in the market that support all popular unlicensed bands (and they can even be mixed in the same BS):
• 902 – 928 MHz
• 2.4 GHz band
• 5.8 GHz band

• Cable operators have difficulties to serve small and medium-size businesses needing
broadband data services
• Small and medium-size businesses are often a few miles of the operator’s network
• Cable is often not an option:
• Typical cost to run coaxial cable: $ 20,000 - $ 100,000 per mile
• Obstacles such as rivers....

Application #1:
• WipLL network may include two tiers to allow building of customer’s network
• Operator’s Base Station and SPRs/IDRs – they may use licensed band (700, MMDS, 3.X) or
unlicensed band (900, 2.4, 5.8)
• Customer’s network – a business customer may use an SPR/IDR for Internet access and also have a second tier - BSR and SPRs / IDRs to connect a few branches or to connect employees to the headquarters – typically using unlicensed band (900, 2.4, 5.8).
• The second tier may be proposed by the operator as a value added service for customers....

• WipLL’s network and WipLL’s Base Station may include layers / sectors from different bands such as:
• Licensed bands (3.X, MMDS, 700) and unlicensed bands (900, 2.4, 5.8)
• Combination of different unlicensed bands (900, 2.4, 5.8)
• Mixing bands provides the following advantages:
• Higher Base Station capacity
• Coping with limited available spectrum

• Purpose: Physically install SPR without the use of laptop or PDA
• RSS Indicator is a LEDs Plug:
– LED for power
– 8 LEDs for RSSI level – Presenting the RSS level, Used for alignment of SPR
• RSS Indicator is powered by the SDA....

• ASWipLL provides an ideal solution for High Capacity P-T-P Links
• How is that done?
• Using parallel P-T-P links
• N links provide N*4Mbps or N*3.35Mbps net data
• N = 1 link = 3.35 Mbps
• N = 2 links = 6.7 Mbps
• N = 3 links = 10.05 Mbps....